Products
Cold drawn elevator guide rails are used as counterweight rails or in elevators with relatively low speeds, typically up to 1.6 m/s. VOL-Stahl offers all dimensions of elevator guide rails to ISO 7465, as well as special dimensions such as RO50.9 and RO70.9.
| Designation | S cm² |
q1 kg/m |
e cm |
lx-x cm4 |
Wx-x cm³ |
ix-x cm |
ly-y cm4 |
Wy-y cm³ |
iy-y cm |
| T45/A | 4,25 | 3,34 | 1,31 | 8,08 | 2,53 | 1,38 | 3,84 | 1,71 | 0,95 |
| RO45M/A | 4,25 | 3,34 | 1,31 | 8,08 | 2,53 | 1,38 | 3,84 | 1,71 | 0,95 |
| T50/A | 4,75 | 3,73 | 1,43 | 11,24 | 3,15 | 1,54 | 5,25 | 2,10 | 1,05 |
| RO50M/A | 4,75 | 3,73 | 1,43 | 11,24 | 3,15 | 1,54 | 5,25 | 2,10 | 1,05 |
| RO50.9/A | 7,07 | 5,55 | 1,70 | 17,36 | 5,26 | 1,57 | 7,02 | 2,81 | 0,99 |
| RO70.9/A | 11,25 | 8,83 | 2,11 | 52,81 | 1,79 | 2,16 | 24,62 | 7,03 | 1,48 |
| T70-1/A | 9,40 | 7,38 | 2,03 | 40,95 | 9,17 | 2,09 | 18,86 | 5,39 | 1,42 |
| T82/A | 10,91 | 8,56 | 2,00 | 49,31 | 10,27 | 2,12 | 30,17 | 7,36 | 1,66 |
| T89/A | 15,77 | 12,38 | 2,03 | 59,83 | 14,35 | 1,95 | 52,41 | 11,78 | 1,82 |
| T90/A | 17,25 | 13,54 | 2,61 | 102,00 | 20,86 | 2,43 | 52,48 | 11,66 | 1,74 |
| T125/A | 22,83 | 17,90 | 2,43 | 151,00 | 26,20 | 2,57 | 159,00 | 25,40 | 2,64 |
| Designation | b1 | h1 | k | n | c | m1 | m2 | u1 | u2 |
| RO45M/A | 45,00 | 45,00 | 5,00 | - | - | 2,00 | 1,95 | 2,50 | 2,00 |
| RO50M/A | 50,00 | 50,00 | 5,00 | - | - | 2,00 | 1,95 | 2,50 | 2,00 |
| RO50.9/A | 50,00 | 50,00 | 9,00 | 35,00 | 7,50 | 3,00 | 2,95 | 3,50 | 3,00 |
| RO70.9/A | 70,00 | 70,00 | 9,00 | 35,00 | 7,90 | 3,00 | 2,95 | 3,50 | 3,00 |
| T70-1/A | 70,00 | 65,00 | 9,00 | 34,00 | 6,00 | 3,00 | 2,97 | 3,50 | 3,00 |
| T82/A | 82,00 | 68,00 | 9,00 | 34,00 | 7,50 | 3,00 | 2,97 | 3,50 | 3,00 |
| T89/A | 89,00 | 62,00 | 16,00 | 34,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T90/A | 90,00 | 75,00 | 16,00 | 42,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T125/A | 125,00 | 82,00 | 16,00 | 42,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
Machined elevator guide rails have a smoother running surface compared to cold-drawn ones and are therefore better suited for heavy-duty and high-speed applications.
| Designation | S cm² |
q1 kg/m |
e cm |
lx-x cm4 |
Wx-x cm³ |
ix-x cm |
ly-y cm4 |
Wy-y cm³ |
iy-y cm |
| T75-3/B 1997 | 10,99 | 8,63 | 1,86 | 40,35 | 9,29 | 1,92 | 26,49 | 7,06 | 1,55 |
| T75/B 2007 | 10,91 | 8,56 | 1,86 | 40,29 | 9,29 | 1,92 | 26,47 | 7,06 | 1,56 |
| T89/B 1997 | 15,70 | 12,30 | 2,02 | 59,52 | 14,25 | 1,95 | 52,40 | 11,80 | 1,83 |
| T89/B 2007 | 15,77 | 12,38 | 2,03 | 59,83 | 14,35 | 1,95 | 52,41 | 11,78 | 1,82 |
| T90/B | 17,25 | 13,54 | 2,61 | 102,00 | 20,86 | 2,43 | 52,48 | 11,66 | 1,74 |
| T125/B | 22,82 | 17,91 | 2,43 | 151,00 | 26,16 | 2,57 | 159,10 | 25,46 | 2,64 |
| T127-2/B | 28,72 | 22,55 | 2,48 | 201,70 | 31,17 | 2,64 | 229,90 | 36,20 | 2,83 |
| RO127-2c14/B 1997 | 28,63 | 22,48 | 2,47 | 198,40 | 30,90 | 2,63 | 230,00 | 36,20 | 2,83 |
| RO127-2c14/B 2007 | 28,72 | 22,55 | 2,48 | 201,70 | 31,17 | 2,64 | 229,90 | 36,20 | 2,83 |
| T140-1/B | 35,15 | 27,59 | 3,24 | 403,30 | 53,32 | 3,39 | 309,70 | 44,24 | 2,97 |
| Designation | b1 | h1 | k | n | c | m1 | m2 | u1 | u2 |
| T75-3/B 1997 | 75,00 | 62,00 | 10,00 | 30,00 | 8,00 | 3,00 | 2,95 | 3,50 | 3,00 |
| T75/B 2007 | 75,00 | 62,00 | 10,00 | 30,00 | 8,00 | 3,00 | 2,97 | 3,50 | 3,50 |
| T89/B 1997 | 89,00 | 62,00 | 15,88 | 33,40 | 10,00 | 6,40 | 6,37 | 7,14 | 6,34 |
| T89/B 2007 | 89,00 | 62,00 | 16,00 | 34,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T90/B | 90,00 | 75,00 | 16,00 | 42,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T125/B | 125,00 | 82,00 | 16,00 | 42,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T127-2/B | 127,00 | 89,00 | 16,00 | 51,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| RO127-2c14/B 1997 | 127,00 | 89,00 | 15,88 | 51,00 | 14,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| RO127-2c14/B 2007 | 127,00 | 89,00 | 16,00 | 51,00 | 14,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T140-1/B | 140,00 | 108,00 | 19,00 | 51,00 | 12,70 | 6,40 | 6,37 | 7,14 | 6,35 |
| Tolerances | ± 1,5 | ± 0,75 | ± 0,10 | 0/+3 | - | 0/+0,06 | -0,06/0 | ± 0,10 | ± 0,10 |
Perfect geometry, high surface smoothness and perfect connections - these are the requirements for high-quality guide rails. Key factors for safety in the environment of exceptionally high pressures and speeds are tight tolerances combined with excellent mechanical properties of the material.
| Designation | S cm² |
q1 kg/m |
e cm |
lx-x cm4 |
Wx-x cm³ |
ix-x cm |
ly-y cm4 |
Wy-y cm³ |
iy-y cm |
| T75/BE 2007 | 10,91 | 8,56 | 1,86 | 40,29 | 9,29 | 1,92 | 26,47 | 7,06 | 1,56 |
| T89/BE 2007 | 15,77 | 12,38 | 2,03 | 59,83 | 14,35 | 1,95 | 52,41 | 11,78 | 1,82 |
| T90/BE | 17,25 | 13,54 | 2,61 | 102,00 | 20,86 | 2,43 | 52,48 | 11,66 | 1,74 |
| T125/BE | 22,82 | 17,91 | 2,43 | 151,00 | 26,16 | 2,57 | 159,10 | 25,46 | 2,64 |
| T127-2/B | 28,72 | 22,55 | 2,48 | 201,70 | 31,17 | 2,64 | 229,90 | 36,20 | 2,83 |
| RO127-2c14/B 1997 | 28,63 | 22,48 | 2,47 | 198,40 | 30,90 | 2,63 | 230,00 | 36,20 | 2,83 |
| RO127-2c14/B 2007 | 28,72 | 22,55 | 2,48 | 201,70 | 31,17 | 2,64 | 229,90 | 36,20 | 2,83 |
| T140-1/B | 35,15 | 27,59 | 3,24 | 403,30 | 53,32 | 3,39 | 309,70 | 44,24 | 2,97 |
| Designation | b1 | h1 | k | n | c | m1 | m2 | u1 | u2 |
| T75/BE 2007 | 75,00 | 62,00 | 10,00 | 30,00 | 8,00 | 3,00 | 2,97 | 3,50 | 3,50 |
| T89/BE 2007 | 89,00 | 52,00 | 16,00 | 34,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T90/BE | 90,00 | 75,00 | 16,00 | 42,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T125/BE | 125,00 | 82,00 | 16,00 | 42,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T127-2/B | 127,00 | 89,00 | 16,00 | 51,00 | 10,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| RO127-2c14/B 1997 | 127,00 | 89,00 | 15,88 | 51,00 | 14,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| RO127-2c14/B 2007 | 127,00 | 89,00 | 16,00 | 51,00 | 14,00 | 6,40 | 6,37 | 7,14 | 6,35 |
| T140-1/B | 140,00 | 108,00 | 19,00 | 51,00 | 12,70 | 6,40 | 6,37 | 7,14 | 6,35 |
| Tolerances | ± 1,5 | ± 0,75 | ± 0,05 | 0/+3 | - | 0/+0,03 | -0,03/+0 | ± 0,10 | ± 0,10 |
All guide rails can be supplied with appropriate components, such as bumper plates, screw sets and T-clamping screws.
| Guide rail type | d | b2 | b3 | l1 | l2f | l3f | v |
| T45/A | 9 | 50 | 25 | 160 | 65 | 15 | 8 |
| RO45M/A | |||||||
| T50/A | 9 | 50 | 30 | 200 | 75 | 25 | 8 |
| RO50M/A | |||||||
| RO50.9/A | |||||||
| RO70.9/A | 13 | 75 | 43 | 240 | 90 | 30 | 8,5 |
| T70-1/A | 13 | 70 | 42 | 250 | 105 | 25 | 10 |
| T75-3/B 1997 | 13 | 75 | 43 | 240 | 90 | 30 | 8,5 |
| T75/B 2007 | 13 | 70 | 42 | 250 | 105 | 25 | 10 |
| T82/A | 13 | 80 | 50,8 | 216 | 81 | 27 | 10 |
| T89/A | 13 | 90 | 57,2 | 305 | 114,3 | 38,1 | 13 |
| T89/B 1997 | |||||||
| T89/B 2007 | |||||||
| T90/A | |||||||
| T90/B | |||||||
| T125/B | 17 | 130 | 79,4 | 305 | 114,3 | 38,1 | 18 |
| T127-2/B | |||||||
| RO127-2c14/B 1997 | |||||||
| RO127-2c14/B 2007 | |||||||
| T140-1/B | 21 | 140 | 92,1 | 380 | 152,4 | 31,8 | 28 |
| T140-2/B | |||||||
| Tolerances | - | - | ± 0,2 | 0/+3 | ± 0,2 | ± 0,2 | 0/+3 |
As a manufacturer of special profiles, we offer not only elevator guide rails but also other cold-drawn profiles that can be used in the production of elevators and especially door elements.
